Archives: Projects

Home   /   Project

Description

The new DGV1 compressed air defoliator is especially designed for vineyards.

The powerful compressor sends compressed air to the machine which, with its rotor, shoots the air flow onto the rows, uncovering the vine without damaging it and so that it receives direct sunlight.

  • Hydraulic height adjustment with 1 piston
  • Lateral hydraulic adjustment with 1 piston
  • Hydraulic swing adjustment with 1 piston
  • Working height 800mm
  • Works with 1 hydraulic motor (requires 130 bar of pressure and 18 litres/minute of oil)
  • Forward speed 1.5 – 3km/h
  • Pressure from 0.5 to 0.7 bar
  • Tractor required power >65hp
  • Air flow up to 45 m³/min
  • Electronic joystick
  • Complete with pipes
  • Supporting structure in iron
  • Machine weight 150 kg.
  • Compressor weight 270 kg.
  • Rest platform
  • Piston in addition
  • Additional Block
  • Cardan shaft cat.5 L=800mm/1000mm
GALLERY ACCESSORI

Descrizione

The new DGV1 compressed air defoliator is especially designed for vineyards.

The powerful compressor sends compressed air to the machine which, with its rotor, shoots the air flow onto the rows, uncovering the vine without damaging it and so that it receives direct sunlight.

  • Hydraulic reversibility adjustment
  • Hydraulic height adjustment with 1 piston
  • Lateral hydraulic adjustment with 1 piston
  • Hydraulic swing adjustment with 1 piston
  • Works with 1 hydraulic motor (requires 150 bar of pressure and 20 litres/minute of oil)
  • Electronic joystick
  • Variable working height from 500mm to 1000mm
  • Headboard dimensions 800mm
  • Forward speed 1.5 – 3km/h
  • Pressure from 0.6 to 0.7 bar
  • Tractor required power >75v
  • Air flow up to 45 m³/min
  • Machine weight 200 kg.
  • Compressor weight 270 kg.
  • Supporting structure in iron
  • Complete with pipes
  • Rest platform
  • Piston in addition
  • Additional Block
  • Cardan shaft cat.5 L=800mm/1000mm
GALLERY ACCESSORI

Description

The new DF1 PLUS compressed air leaf remover is especially designed for orchards.
The powerful compressor shoots compressed air on the rows, uncovering the fruits without damaging them and so that they receive direct sunlight.

  • Mechanical tilt adjustment
  • Hydraulic height adjustment with 1 piston
  • Side hydraulic adjustment (displacement) with 1 piston
  • Independent hydraulic adjustment for inclination of the upper and lower head with 2 pistons
  • Head size 2300mm
  • Travel speed 1.5 – 3 km / h
  • Pressure from 0.6 to 0.7 bar
  • Tractor power required> 90hp
  • Air flow up to 55 m³ / min
  • Works with 2 hydraulic motors (requires 150 bar pressure and 20 liters / minute of oil)
  • Complete with pipes
  • Complete with electronic joystick
  • Supporting structure in iron
  • Machine weight 290 kg
  • Compressor weight 400 kg
  • Rest platform
  • Piston in addition
  • Additional Block
  • Compressor lights kit
  • Cardan cat.7 L=800mm
  • Cardan cat.7 L=1000mm
GALLERY ACCESSORI

Description

The VBC GRASS REMOVING MACHINE, with its gear motor, is able to rotate the shaft and its special rubber cable with internal core up to a speed of 2000 RPM. This range allows you to remove not only the suckers at the right speed, but by increasing it, it allows you to perform a weeding function.

  • Machine with 2 shafts (right – left)
  • Hydraulic height adjustment with 1 piston
  • Side hydraulic adjustment with 1 piston
  • Hydraulic lower swing adjustment with 1 piston
  • Hydraulic upper swing adjustment with 1 piston
  • Mechanical adjustment of external head (height)
  • External arm with safety gas piston
  • Teflon rollers with rubber cables diameter 7 with internal nylon core
  • It works with 2 hydraulic gear motors (requires 150 bar of pressure and 20 liters / minute of oil)
  • Complete with pipes
  • Supporting structure in iron with stainless steel hood
  • Electronic joystick
  • Machine weight 230 kg
  • Rest platform
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Shockproof with spring for flat terrain
  • Spare thread
  • Spare skein
GALLERY ACCESSORIES

Description

The new DF1 compressed air leaf remover is especially designed for orchards.
The powerful compressor shoots compressed air on the rows, uncovering the fruits without damaging them and so that they receive direct sunlight.

  • Mechanical tilt adjustment
  • Hydraulic height adjustment with 1 piston
  • Side hydraulic adjustment (displacement) with 1 piston
  • Independent hydraulic adjustment for inclination of the upper and lower head with 2 pistons
  • Head size 1800mm
  • Travel speed 1.5 – 3 km / h
  • Pressure from 0.6 to 0.7 bar
  • Tractor power required> 80hp
  • Air flow up to 55 m³ / min
  • Works with 2 hydraulic motors (requires 150 bar pressure and 20 liters / minute of oil)
  • Complete with pipes
  • Complete with electronic joystick
  • Supporting structure in iron
  • Machine weight 250 kg
  • Compressor weight 400 kg
  • Rest platform
  • Piston in addition
  • Additional Block
  • Cardan cat.7 L=800mm
  • Cardan cat.7 L=1000mm
GALLERY ACCESSORIES

Descrizione

The pruning machine is designed to reduce and optimize the pruning work in the vineyards. It looks like a solid iron structure that is anchored to the front of the tractor by means of a special flange.

Reversible 90 ° model with knives for Pergola, Espalier and Guyot type vineyards.

  • Vertical bar with 3 blades (useful cut 120 mm)
  • Horizontal bar with 2 blades (useful cut 800 mm)
  • Hydraulic tilt adjustment with 1 piston
  • Hydraulic height adjustment with 1 piston
  • Hydraulic head bar adjustment with 1 piston
  • Hydraulic side bar adjustment with 1 piston
  • Antishock on the 2 knife bar
  • 420 mm special hardened steel knives
  • 5-function hydraulic distributor with knives speed regulator
  • Works with 2 hydraulic motors (requires 150 bar pressure and 22 liters / minute of oil)
  • Complete with pipes
  • Cutting part in stainless steel
  • Machine weight 210 kg
  • Curved knives with relief cut
  • Vegetation protection
  • Rest platform
  • Additional knife (for a useful cut of 2000mm)
  • 5-function electronic joystick
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Adjustable flow divider
  • Lifting wheel with speed regulator
  • Radiator
GALLERY ACCESSORIES

Description

The VBC SPOUTING MACHINE is designed for the elimination of vine suckers and weeds in the rows of vineyards. Suckers are eliminated by the special rubber cable of the rotor. The cable is fixed on the rotor by means of steel screws and their replacement is quick and easy. The rotation of the rotor is hydraulic, the rotation speed can be controlled by the flow regulator of the machine.

This model is attached to the rear of the tractor by means of a lift.

  • Machine with 1 right shaft and 1 left shaft
  • Hydraulic opening and closing adjustment with 2 pistons
  • Return spring on the heads
  • Special rubber cable 7mm diameter
  • Without distributor with hydraulic hoses complete with quick couplings
  • Works with 2 hydraulic motors (requires 140 bar pressure and 20 liters / minute of oil)
  • Machine completely closed from center to center of tree: 2.00mt
  • Machine completely open from center to center of tree: 2.80mt
  • Third point attack
  • The tractor requires two double-acting distributors
  • Machine weight 220 kg
  • 3-lever hydraulic distributor
GALLERY ACCESSORIES

Description

The PJA DISC PRUNER is designed for pruning fruit trees with branches up to a maximum of 4cm and is recommended for plantations of cocoa, mango, olive trees, hazelnuts etc.

  • Maximum cutting diameter 4 cm
  • Vertical cutting bar with 6 discs diameter 400mm (useful cut 2.35mt)
  • Hydraulic height adjustment with 1 piston
  • Hydraulic tilt adjustment with 1 piston
  • Side hydraulic adjustment (displacement) with 1 piston
  • 5-function hydraulic distributor
  • Works with 2 hydraulic motors (requires 150 bar pressure and 22 liters / minute of oil)
  • Supporting structure in iron
  • Machine weight 250 kg
  • Rest platform
  • Electronic joystick
  • Tank group 180Lt. complete with pump, multiplier, radiator and relief valve
  • Tilting motorized cash desk
GALLERY ACCESSORIES

Description

The PJB DISC PRUNER is designed for pruning fruit trees with branches up to a maximum of 8cm and is recommended for plantations of cocoa, mango, olive trees, hazelnuts etc.

Equipped with a double upright frame, it ensures greater strength and greater safety during cutting.

  • Maximum cutting diameter 8 cm
  • Vertical cutting bar with 5 motorized discs diameter 500mm (useful cut 2.30mt)
  • Hydraulic height adjustment with 1 piston
  • Hydraulic tilt adjustment with 1 piston
  • Side hydraulic adjustment (displacement) with 1 piston
  • 5-function hydraulic distributor
  • It works with 5 hydraulic motors (requires 150 bar of pressure and 45 liters / minute of oil)
  • Independent tank of 180lt
  • Supporting structure in iron with double upright
  • Machine weight 450 kg
  • Rest platform
  • Electronic joystick
  • Tank group 180Lt. complete with pump, multiplier, radiator and relief valve
  • Tilting motorized cash desk
GALLERY ACCESSORIES

Description

The BiF4/V pruning machine by VBC is equipped with a V-shaped frame that allows for a very narrow closing position and a maximum opening of about 3 MT from blade center to blade center.

  • N ° 2 double-blade vertical bars (right-left) with useful cut 1900mm
  • N ° 2 upper double-blade bars (right-left) with useful cut 850mm
  • Hydraulic lower swing adjustment with 2 pistons
  • Hydraulic height adjustment with 2 pistons
  • Hydraulic upper swing adjustment with 2 pistons
  • Hydraulic adjustment of upper bars with 2 pistons
  • Antishock on the vertical bars
  • 8-function joystick with blade speed regulator
  • Works with 4 hydraulic motors (requires 150 bar of pressure and 30 l / min of oil)
  • Complete with pipes
  • Supporting structure in iron
  • Machine weight 460 kg
  • Vertical double blade bar with useful cut 2100mm
  • Rest platform
  • Tank group 80Lt. complete with pump, multiplier, radiator, relief valve (WITHOUT OIL)
  • Adjustable flow divider to vary the oil flow (to be installed on the tank)
  • Radiator
  • Safety joint for upper head
  • Lifting wheel with speed regulator
ACCESSORIES GALLERY